Merge pull request #1695 from fatedier/doc

update doc
This commit is contained in:
fatedier 2020-03-11 14:18:12 +08:00 committed by GitHub
commit 859a330e6c
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
5 changed files with 169 additions and 9 deletions

View File

@ -30,7 +30,11 @@ frp also has a P2P connect mode.
* [Using Environment Variables](#using-environment-variables)
* [Dashboard](#dashboard)
* [Admin UI](#admin-ui)
* [Monitor](#monitor)
* [Prometheus](#prometheus)
* [Authenticating the Client](#authenticating-the-client)
* [Token Authentication](#token-authentication)
* [OIDC Authentication](#oidc-authentication)
* [Encryption and Compression](#encryption-and-compression)
* [TLS](#tls)
* [Hot-Reloading frpc configuration](#hot-reloading-frpc-configuration)
@ -49,9 +53,10 @@ frp also has a P2P connect mode.
* [Get Real IP](#get-real-ip)
* [HTTP X-Forwarded-For](#http-x-forwarded-for)
* [Proxy Protocol](#proxy-protocol)
* [Require HTTP Basic auth (password) for web services](#require-http-basic-auth-password-for-web-services)
* [Custom subdomain names](#custom-subdomain-names)
* [URL routing](#url-routing)
* [Require HTTP Basic Auth (Password) for Web Services](#require-http-basic-auth-password-for-web-services)
* [Custom Subdomain Names](#custom-subdomain-names)
* [URL Routing](#url-routing)
* [TCP Port Multiplexing](#tcp-port-multiplexing)
* [Connecting to frps via HTTP PROXY](#connecting-to-frps-via-http-proxy)
* [Range ports mapping](#range-ports-mapping)
* [Client Plugins](#client-plugins)
@ -435,6 +440,18 @@ admin_pwd = admin
Then visit `http://127.0.0.1:7400` to see admin UI, with username and password both being `admin` by default.
### Monitor
When dashboard is enabled, frps will save monitor data in cache. It will be cleared after process restart.
Prometheus is also supported.
#### Prometheus
Enable dashboard first, then configure `enable_prometheus = true` in `frps.ini`.
`http://{dashboard_addr}/metrics` will provide prometheus monitor data.
### Authenticating the Client
There are 2 authentication methods to authenticate frpc with frps.
@ -818,11 +835,11 @@ locations = /news,/about
HTTP requests with URL prefix `/news` or `/about` will be forwarded to **web02** and other requests to **web01**.
### TCP Multiplexing
### TCP Port Multiplexing
frp supports receiving TCP sockets directed to different proxies on a single port on frps, similar to `vhost_http_port` and `vhost_https_port`.
The only supported TCP multiplexing method available at the moment is `httpconnect` - HTTP CONNECT tunnel.
The only supported TCP port multiplexing method available at the moment is `httpconnect` - HTTP CONNECT tunnel.
When setting `tcpmux_httpconnect_port` to anything other than 0 in frps under `[common]`, frps will listen on this port for HTTP CONNECT requests.

View File

@ -26,7 +26,11 @@ frp 是一个可用于内网穿透的高性能的反向代理应用,支持 tcp
* [配置文件模版渲染](#配置文件模版渲染)
* [Dashboard](#dashboard)
* [Admin UI](#admin-ui)
* [身份验证](#身份验证)
* [监控](#监控)
* [Prometheus](#prometheus)
* [客户端身份验证](#客户端身份验证)
* [Token](#token)
* [OIDC](#oidc)
* [加密与压缩](#加密与压缩)
* [TLS](#tls)
* [客户端热加载配置文件](#客户端热加载配置文件)
@ -48,6 +52,7 @@ frp 是一个可用于内网穿透的高性能的反向代理应用,支持 tcp
* [通过密码保护你的 web 服务](#通过密码保护你的-web-服务)
* [自定义二级域名](#自定义二级域名)
* [URL 路由](#url-路由)
* [TCP 端口复用类型](#tcp-端口复用类型)
* [通过代理连接 frps](#通过代理连接-frps)
* [范围端口映射](#范围端口映射)
* [客户端插件](#客户端插件)
@ -459,9 +464,56 @@ admin_pwd = admin
如果想要在外网环境访问 Admin UI将 7400 端口映射出去即可,但需要重视安全风险。
### 身份验证
### 监控
服务端和客户端的 common 配置中的 `token` 参数一致则身份验证通过。
frps 当启用 Dashboard 后,会默认开启内部的监控,数据存放在内存中,每次重启进程后会清空,监控数据可以通过 dashboard 的地址发送 HTTP 请求获取。
目前还支持 Prometheus 作为可选的监控系统。
#### Prometheus
`frps.ini` 中启用 Dashboard并且设置 `enable_prometheus = true`,则通过 `http://{dashboard_addr}/metrics` 可以获取到 Prometheus 的监控数据。
### 客户端身份验证
目前 frpc 和 frps 之间支持两种身份验证方式,`token` 和 `oidc`
通过 `frpc.ini``frps.ini``[common]` section 的 `authentication_method` 参数配置需要使用的验证方法。
`authenticate_heartbeats = true` 将会在每一个心跳包中附加上鉴权信息。
`authenticate_new_work_conns = true` 将会在每次建立新的工作连接时附加上鉴权信息。
#### Token
`authentication_method = token`,将会启用基于 token 的验证方式。
需要在 `frpc.ini``frps.ini``[common]` section 中设置相同的 `token`
#### OIDC
`authentication_method = oidc`,将会启用基于 OIDC 的身份验证。
验证流程参考 [Client Credentials Grant](https://tools.ietf.org/html/rfc6749#section-4.4)
启用这一验证方式,配置 `frpc.ini``frps.ini` 如下:
```ini
# frps.ini
[common]
authentication_method = oidc
oidc_issuer = https://example-oidc-issuer.com/
oidc_audience = https://oidc-audience.com/.default
```
```ini
[common]
authentication_method = oidc
oidc_client_id = 98692467-37de-409a-9fac-bb2585826f18 # Replace with OIDC client ID
oidc_client_secret = oidc_secret
oidc_audience = https://oidc-audience.com/.default
oidc_token_endpoint_url = https://example-oidc-endpoint.com/oauth2/v2.0/token
```
### 加密与压缩
@ -487,6 +539,8 @@ use_compression = true
为了端口复用frp 建立 TLS 连接的第一个字节为 0x17。
通过将 frps.ini 的 `[common]``tls_only` 设置为 true可以强制 frps 只接受 TLS 连接。
**注意: 启用此功能后除 xtcp 外,不需要再设置 use_encryption。**
### 客户端热加载配置文件
@ -824,6 +878,50 @@ locations = /news,/about
按照上述的示例配置后,`web.yourdomain.com` 这个域名下所有以 `/news` 以及 `/about` 作为前缀的 URL 请求都会被转发到 web02其余的请求会被转发到 web01。
### TCP 端口复用类型
frp 支持将单个端口收到的连接路由到不同的代理,类似 `vhost_http_port``vhost_https_port`
目前支持的复用器只有 `httpconnect`
当在 `frps.ini``[common]` 中设置 `tcpmux_httpconnect_port`frps 将会监听在这个端口,接收 HTTP CONNECT 请求。
frps 会根据 HTTP CONNECT 请求中的 host 路由到不同的后端代理。
示例配置如下:
```ini
# frps.ini
[common]
bind_port = 7000
tcpmux_httpconnect_port = 1337
```
```ini
# frpc.ini
[common]
server_addr = x.x.x.x
server_port = 7000
[proxy1]
type = tcpmux
multiplexer = httpconnect
custom_domains = test1
[proxy2]
type = tcpmux
multiplexer = httpconnect
custom_domains = test2
```
通过上面的配置frps 如果接收到 HTTP CONNECT 请求内容:
```
CONNECT test1 HTTP/1.1\r\n\r\n
```
该连接将会被路由到 proxy1 。
### 通过代理连接 frps
在只能通过代理访问外网的环境内frpc 支持通过 HTTP PROXY 和 frps 进行通信。

View File

@ -264,3 +264,10 @@ bind_addr = 127.0.0.1
bind_port = 9001
use_encryption = false
use_compression = false
[tcpmuxhttpconnect]
type = tcpmux
multiplexer = httpconnect
local_ip = 127.0.0.1
local_port = 10701
custom_domains = tunnel1

View File

@ -23,6 +23,12 @@ vhost_https_port = 443
# response header timeout(seconds) for vhost http server, default is 60s
# vhost_http_timeout = 60
# TcpMuxHttpConnectPort specifies the port that the server listens for TCP
# HTTP CONNECT requests. If the value is 0, the server will not multiplex TCP
# requests on one single port. If it's not - it will listen on this value for
# HTTP CONNECT requests. By default, this value is 0.
# tcpmux_httpconnect_port = 1337
# set dashboard_addr and dashboard_port to view dashboard of frps
# dashboard_addr's default value is same with bind_addr
# dashboard is available only if dashboard_port is set
@ -49,9 +55,38 @@ log_max_days = 3
# disable log colors when log_file is console, default is false
disable_log_color = false
# DetailedErrorsToClient defines whether to send the specific error (with debug info) to frpc. By default, this value is true.
detailed_errors_to_client = true
# AuthenticationMethod specifies what authentication method to use authenticate frpc with frps.
# If "token" is specified - token will be read into login message.
# If "oidc" is specified - OIDC (Open ID Connect) token will be issued using OIDC settings. By default, this value is "token".
authentication_method = token
# AuthenticateHeartBeats specifies whether to include authentication token in heartbeats sent to frps. By default, this value is false.
authenticate_heartbeats = false
# AuthenticateNewWorkConns specifies whether to include authentication token in new work connections sent to frps. By default, this value is false.
authenticate_new_work_conns = false
# auth token
token = 12345678
# OidcClientId specifies the client ID to use to get a token in OIDC authentication if AuthenticationMethod == "oidc".
# By default, this value is "".
oidc_client_id =
# OidcClientSecret specifies the client secret to use to get a token in OIDC authentication if AuthenticationMethod == "oidc".
# By default, this value is "".
oidc_client_secret =
# OidcAudience specifies the audience of the token in OIDC authentication if AuthenticationMethod == "oidc". By default, this value is "".
oidc_audience =
# OidcTokenEndpointUrl specifies the URL which implements OIDC Token Endpoint.
# It will be used to get an OIDC token if AuthenticationMethod == "oidc". By default, this value is "".
oidc_token_endpoint_url =
# heartbeat configure, it's not recommended to modify the default value
# the default value of heartbeat_timeout is 90
# heartbeat_timeout = 90
@ -65,6 +100,9 @@ max_pool_count = 5
# max ports can be used for each client, default value is 0 means no limit
max_ports_per_client = 0
# TlsOnly specifies whether to only accept TLS-encrypted connections. By default, the value is false.
tls_only = false
# if subdomain_host is not empty, you can set subdomain when type is http or https in frpc's configure file
# when subdomain is test, the host used by routing is test.frps.com
subdomain_host = frps.com

View File

@ -19,7 +19,7 @@ import (
"strings"
)
var version string = "0.31.2"
var version string = "0.32.0"
func Full() string {
return version