// Copyright 2020 The frp Authors // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. package config import ( "fmt" "os" "path/filepath" "strings" "gopkg.in/ini.v1" "github.com/fatedier/frp/pkg/auth" "github.com/fatedier/frp/pkg/util/util" ) // ClientCommonConf contains information for a client service. It is // recommended to use GetDefaultClientConf instead of creating this object // directly, so that all unspecified fields have reasonable default values. type ClientCommonConf struct { auth.ClientConfig `ini:",extends"` // ServerAddr specifies the address of the server to connect to. By // default, this value is "0.0.0.0". ServerAddr string `ini:"server_addr" json:"server_addr"` // ServerPort specifies the port to connect to the server on. By default, // this value is 7000. ServerPort int `ini:"server_port" json:"server_port"` // STUN server to help penetrate NAT hole. NatHoleSTUNServer string `ini:"nat_hole_stun_server" json:"nat_hole_stun_server"` // The maximum amount of time a dial to server will wait for a connect to complete. DialServerTimeout int64 `ini:"dial_server_timeout" json:"dial_server_timeout"` // DialServerKeepAlive specifies the interval between keep-alive probes for an active network connection between frpc and frps. // If negative, keep-alive probes are disabled. DialServerKeepAlive int64 `ini:"dial_server_keepalive" json:"dial_server_keepalive"` // ConnectServerLocalIP specifies the address of the client bind when it connect to server. // By default, this value is empty. // this value only use in TCP/Websocket protocol. Not support in KCP protocol. ConnectServerLocalIP string `ini:"connect_server_local_ip" json:"connect_server_local_ip"` // HTTPProxy specifies a proxy address to connect to the server through. If // this value is "", the server will be connected to directly. By default, // this value is read from the "http_proxy" environment variable. HTTPProxy string `ini:"http_proxy" json:"http_proxy"` // LogFile specifies a file where logs will be written to. This value will // only be used if LogWay is set appropriately. By default, this value is // "console". LogFile string `ini:"log_file" json:"log_file"` // LogWay specifies the way logging is managed. Valid values are "console" // or "file". If "console" is used, logs will be printed to stdout. If // "file" is used, logs will be printed to LogFile. By default, this value // is "console". LogWay string `ini:"log_way" json:"log_way"` // LogLevel specifies the minimum log level. Valid values are "trace", // "debug", "info", "warn", and "error". By default, this value is "info". LogLevel string `ini:"log_level" json:"log_level"` // LogMaxDays specifies the maximum number of days to store log information // before deletion. This is only used if LogWay == "file". By default, this // value is 0. LogMaxDays int64 `ini:"log_max_days" json:"log_max_days"` // DisableLogColor disables log colors when LogWay == "console" when set to // true. By default, this value is false. DisableLogColor bool `ini:"disable_log_color" json:"disable_log_color"` // AdminAddr specifies the address that the admin server binds to. By // default, this value is "127.0.0.1". AdminAddr string `ini:"admin_addr" json:"admin_addr"` // AdminPort specifies the port for the admin server to listen on. If this // value is 0, the admin server will not be started. By default, this value // is 0. AdminPort int `ini:"admin_port" json:"admin_port"` // AdminUser specifies the username that the admin server will use for // login. AdminUser string `ini:"admin_user" json:"admin_user"` // AdminPwd specifies the password that the admin server will use for // login. AdminPwd string `ini:"admin_pwd" json:"admin_pwd"` // AssetsDir specifies the local directory that the admin server will load // resources from. If this value is "", assets will be loaded from the // bundled executable using statik. By default, this value is "". AssetsDir string `ini:"assets_dir" json:"assets_dir"` // PoolCount specifies the number of connections the client will make to // the server in advance. By default, this value is 0. PoolCount int `ini:"pool_count" json:"pool_count"` // TCPMux toggles TCP stream multiplexing. This allows multiple requests // from a client to share a single TCP connection. If this value is true, // the server must have TCP multiplexing enabled as well. By default, this // value is true. TCPMux bool `ini:"tcp_mux" json:"tcp_mux"` // TCPMuxKeepaliveInterval specifies the keep alive interval for TCP stream multipler. // If TCPMux is true, heartbeat of application layer is unnecessary because it can only rely on heartbeat in TCPMux. TCPMuxKeepaliveInterval int64 `ini:"tcp_mux_keepalive_interval" json:"tcp_mux_keepalive_interval"` // User specifies a prefix for proxy names to distinguish them from other // clients. If this value is not "", proxy names will automatically be // changed to "{user}.{proxy_name}". By default, this value is "". User string `ini:"user" json:"user"` // DNSServer specifies a DNS server address for FRPC to use. If this value // is "", the default DNS will be used. By default, this value is "". DNSServer string `ini:"dns_server" json:"dns_server"` // LoginFailExit controls whether or not the client should exit after a // failed login attempt. If false, the client will retry until a login // attempt succeeds. By default, this value is true. LoginFailExit bool `ini:"login_fail_exit" json:"login_fail_exit"` // Start specifies a set of enabled proxies by name. If this set is empty, // all supplied proxies are enabled. By default, this value is an empty // set. Start []string `ini:"start" json:"start"` // Start map[string]struct{} `json:"start"` // Protocol specifies the protocol to use when interacting with the server. // Valid values are "tcp", "kcp", "quic" and "websocket". By default, this value // is "tcp". Protocol string `ini:"protocol" json:"protocol"` // QUIC protocol options QUICKeepalivePeriod int `ini:"quic_keepalive_period" json:"quic_keepalive_period" validate:"gte=0"` QUICMaxIdleTimeout int `ini:"quic_max_idle_timeout" json:"quic_max_idle_timeout" validate:"gte=0"` QUICMaxIncomingStreams int `ini:"quic_max_incoming_streams" json:"quic_max_incoming_streams" validate:"gte=0"` // TLSEnable specifies whether or not TLS should be used when communicating // with the server. If "tls_cert_file" and "tls_key_file" are valid, // client will load the supplied tls configuration. TLSEnable bool `ini:"tls_enable" json:"tls_enable"` // TLSCertPath specifies the path of the cert file that client will // load. It only works when "tls_enable" is true and "tls_key_file" is valid. TLSCertFile string `ini:"tls_cert_file" json:"tls_cert_file"` // TLSKeyPath specifies the path of the secret key file that client // will load. It only works when "tls_enable" is true and "tls_cert_file" // are valid. TLSKeyFile string `ini:"tls_key_file" json:"tls_key_file"` // TLSTrustedCaFile specifies the path of the trusted ca file that will load. // It only works when "tls_enable" is valid and tls configuration of server // has been specified. TLSTrustedCaFile string `ini:"tls_trusted_ca_file" json:"tls_trusted_ca_file"` // TLSServerName specifies the custom server name of tls certificate. By // default, server name if same to ServerAddr. TLSServerName string `ini:"tls_server_name" json:"tls_server_name"` // By default, frpc will connect frps with first custom byte if tls is enabled. // If DisableCustomTLSFirstByte is true, frpc will not send that custom byte. DisableCustomTLSFirstByte bool `ini:"disable_custom_tls_first_byte" json:"disable_custom_tls_first_byte"` // HeartBeatInterval specifies at what interval heartbeats are sent to the // server, in seconds. It is not recommended to change this value. By // default, this value is 30. Set negative value to disable it. HeartbeatInterval int64 `ini:"heartbeat_interval" json:"heartbeat_interval"` // HeartBeatTimeout specifies the maximum allowed heartbeat response delay // before the connection is terminated, in seconds. It is not recommended // to change this value. By default, this value is 90. Set negative value to disable it. HeartbeatTimeout int64 `ini:"heartbeat_timeout" json:"heartbeat_timeout"` // Client meta info Metas map[string]string `ini:"-" json:"metas"` // UDPPacketSize specifies the udp packet size // By default, this value is 1500 UDPPacketSize int64 `ini:"udp_packet_size" json:"udp_packet_size"` // Include other config files for proxies. IncludeConfigFiles []string `ini:"includes" json:"includes"` // Enable golang pprof handlers in admin listener. // Admin port must be set first. PprofEnable bool `ini:"pprof_enable" json:"pprof_enable"` } // GetDefaultClientConf returns a client configuration with default values. func GetDefaultClientConf() ClientCommonConf { return ClientCommonConf{ ClientConfig: auth.GetDefaultClientConf(), ServerAddr: "0.0.0.0", ServerPort: 7000, NatHoleSTUNServer: "stun.easyvoip.com:3478", DialServerTimeout: 10, DialServerKeepAlive: 7200, HTTPProxy: os.Getenv("http_proxy"), LogFile: "console", LogWay: "console", LogLevel: "info", LogMaxDays: 3, AdminAddr: "127.0.0.1", PoolCount: 1, TCPMux: true, TCPMuxKeepaliveInterval: 60, LoginFailExit: true, Start: make([]string, 0), Protocol: "tcp", QUICKeepalivePeriod: 10, QUICMaxIdleTimeout: 30, QUICMaxIncomingStreams: 100000, HeartbeatInterval: 30, HeartbeatTimeout: 90, Metas: make(map[string]string), UDPPacketSize: 1500, IncludeConfigFiles: make([]string, 0), } } func (cfg *ClientCommonConf) Complete() { if cfg.LogFile == "console" { cfg.LogWay = "console" } else { cfg.LogWay = "file" } } func (cfg *ClientCommonConf) Validate() error { if cfg.HeartbeatTimeout > 0 && cfg.HeartbeatInterval > 0 { if cfg.HeartbeatTimeout < cfg.HeartbeatInterval { return fmt.Errorf("invalid heartbeat_timeout, heartbeat_timeout is less than heartbeat_interval") } } if !cfg.TLSEnable { if cfg.TLSCertFile != "" { fmt.Println("WARNING! tls_cert_file is invalid when tls_enable is false") } if cfg.TLSKeyFile != "" { fmt.Println("WARNING! tls_key_file is invalid when tls_enable is false") } if cfg.TLSTrustedCaFile != "" { fmt.Println("WARNING! tls_trusted_ca_file is invalid when tls_enable is false") } } if cfg.Protocol != "tcp" && cfg.Protocol != "kcp" && cfg.Protocol != "websocket" && cfg.Protocol != "quic" { return fmt.Errorf("invalid protocol") } for _, f := range cfg.IncludeConfigFiles { absDir, err := filepath.Abs(filepath.Dir(f)) if err != nil { return fmt.Errorf("include: parse directory of %s failed: %v", f, absDir) } if _, err := os.Stat(absDir); os.IsNotExist(err) { return fmt.Errorf("include: directory of %s not exist", f) } } return nil } // Supported sources including: string(file path), []byte, Reader interface. func UnmarshalClientConfFromIni(source interface{}) (ClientCommonConf, error) { f, err := ini.LoadSources(ini.LoadOptions{ Insensitive: false, InsensitiveSections: false, InsensitiveKeys: false, IgnoreInlineComment: true, AllowBooleanKeys: true, }, source) if err != nil { return ClientCommonConf{}, err } s, err := f.GetSection("common") if err != nil { return ClientCommonConf{}, fmt.Errorf("invalid configuration file, not found [common] section") } common := GetDefaultClientConf() err = s.MapTo(&common) if err != nil { return ClientCommonConf{}, err } common.Metas = GetMapWithoutPrefix(s.KeysHash(), "meta_") common.ClientConfig.OidcAdditionalEndpointParams = GetMapWithoutPrefix(s.KeysHash(), "oidc_additional_") return common, nil } // if len(startProxy) is 0, start all // otherwise just start proxies in startProxy map func LoadAllProxyConfsFromIni( prefix string, source interface{}, start []string, ) (map[string]ProxyConf, map[string]VisitorConf, error) { f, err := ini.LoadSources(ini.LoadOptions{ Insensitive: false, InsensitiveSections: false, InsensitiveKeys: false, IgnoreInlineComment: true, AllowBooleanKeys: true, }, source) if err != nil { return nil, nil, err } proxyConfs := make(map[string]ProxyConf) visitorConfs := make(map[string]VisitorConf) if prefix != "" { prefix += "." } startProxy := make(map[string]struct{}) for _, s := range start { startProxy[s] = struct{}{} } startAll := true if len(startProxy) > 0 { startAll = false } // Build template sections from range section And append to ini.File. rangeSections := make([]*ini.Section, 0) for _, section := range f.Sections() { if !strings.HasPrefix(section.Name(), "range:") { continue } rangeSections = append(rangeSections, section) } for _, section := range rangeSections { err = renderRangeProxyTemplates(f, section) if err != nil { return nil, nil, fmt.Errorf("failed to render template for proxy %s: %v", section.Name(), err) } } for _, section := range f.Sections() { name := section.Name() if name == ini.DefaultSection || name == "common" || strings.HasPrefix(name, "range:") { continue } _, shouldStart := startProxy[name] if !startAll && !shouldStart { continue } roleType := section.Key("role").String() if roleType == "" { roleType = "server" } switch roleType { case "server": newConf, newErr := NewProxyConfFromIni(prefix, name, section) if newErr != nil { return nil, nil, fmt.Errorf("failed to parse proxy %s, err: %v", name, newErr) } proxyConfs[prefix+name] = newConf case "visitor": newConf, newErr := NewVisitorConfFromIni(prefix, name, section) if newErr != nil { return nil, nil, newErr } visitorConfs[prefix+name] = newConf default: return nil, nil, fmt.Errorf("proxy %s role should be 'server' or 'visitor'", name) } } return proxyConfs, visitorConfs, nil } func renderRangeProxyTemplates(f *ini.File, section *ini.Section) error { // Validation localPortStr := section.Key("local_port").String() remotePortStr := section.Key("remote_port").String() if localPortStr == "" || remotePortStr == "" { return fmt.Errorf("local_port or remote_port is empty") } localPorts, err := util.ParseRangeNumbers(localPortStr) if err != nil { return err } remotePorts, err := util.ParseRangeNumbers(remotePortStr) if err != nil { return err } if len(localPorts) != len(remotePorts) { return fmt.Errorf("local ports number should be same with remote ports number") } if len(localPorts) == 0 { return fmt.Errorf("local_port and remote_port is necessary") } // Templates prefix := strings.TrimSpace(strings.TrimPrefix(section.Name(), "range:")) for i := range localPorts { tmpname := fmt.Sprintf("%s_%d", prefix, i) tmpsection, err := f.NewSection(tmpname) if err != nil { return err } copySection(section, tmpsection) if _, err := tmpsection.NewKey("local_port", fmt.Sprintf("%d", localPorts[i])); err != nil { return fmt.Errorf("local_port new key in section error: %v", err) } if _, err := tmpsection.NewKey("remote_port", fmt.Sprintf("%d", remotePorts[i])); err != nil { return fmt.Errorf("remote_port new key in section error: %v", err) } } return nil } func copySection(source, target *ini.Section) { for key, value := range source.KeysHash() { _, _ = target.NewKey(key, value) } }